This is a multi-functional hammer. It provides the following 10 functionalities.

1. The first function: it can work as a pipe wrench. It fits the size of 1/2” up to pipes 1” pipes. If you find it difficult to wrench the pipe, you can add a tube at this end to increase the moment to make it easy to wrench.
2. The second function: it can work as an adjustable wrench.
3. The third function: you can hammer a nail in wooden material with one hand only by placing the nail in the notch of the clamp part.
4. The fourth function: use it as a hammer.
5. The fifth function: use it as a nail puller.
6. The sixth function: you can use it as pliers to cut wire or nails.
7. The seventh function: use the clamp part to pull out nails that without head.
8. The eighth function: place the screwdriver in this hole and it can work as a phillips screwdriver or a slotted screwdriver. You can use both hands to do this job. So you can have much more strength to tweak any screw. 
9. The ninth function: Generally we could easily hurt our fingers or bend the nails when we are trying to hammer a nail into concrete wall. Multi-functional hammer to the rescue!

Place a nail in the semi-circle shaped hole located on the clamp part. Push the nail inside to the end while slightly holding the handle. Position the tool to the correct point to be hammered. Hold the handle tightly; strike the piston head with another hammer, using as much force as possible. Simple and easy.

  10.The tenth function: You can use the clamp part to pick up hot object.

You don’t have to buy ten tools to do all these jobs; multi-functional hammer can do them all.

Demonstration Picture